2020 Fall blog hop

 Welcome to the Creative Life Scrapbooking 2020 Fall Blog Hop

Enjoy all the the Blogs 💗

For this project I used the Hello Autumn Collection 

I can't get enough of these beautiful embellishments.

With all the pieces that are embossed with gold .. its simple to make a fall layout. 

First I cut 2 - 6x6 squares using patterned paper. Then I used the arch border punch to create a frame.

With the edge of the square patterned paper .. line up the side with the line on the side of the punch, then line up the design for the next punch. Repeat as you go to the next side. 

Trim your photo to be 3.5 x 3.5 inches

Then cut one of the squares in 4 , lining up in the middle of the design.

rotate and repeat.  

this will create 4 pieces to use in the corners of your layout.

Have fun decorating with the embellishments and stickers ..

Arrange to highlight your middle photo.

                         

Thank you for checking out my Blog

Please keep on hopping by checking out the other great blogs below .. 

Krista French < you are here 

Meggan Jacks  < go to next 

Karyn McDermaid-Rolfe

Diana Brinsley

Tessa Chapple

Fran Allen Smitherman

Noreen Smith

Lisa Brown Graham

Enjoy the blog hop 

Happy Scrappin'

Christmas Tree

Christmas Tree 

For this project I use the cloud border maker cartridge, foam squares, the 12 inch trimmer, and the Christmas spirit Collection.

Using the border maker system, I punched 2 , 12 inch strips with one patterned paper and punched 2 , 12 inch strips with another papered paper..

Use the 12 inch trimmer to cut at 2inches in between cuts to create 4 pieces.

Using alternating patterned strips.. cut one strip at 6 inches then the next strip at 5 inches.. the same strip at the next 5inches and put all pieces aside.

last two pieces.. checking that they are 2 different patterned papers. Cut both at the 4.5 mark the move piece along and cut at 4inches.. This will leave a 3.5 piece.

Arrange all pieces from the bottom, partly stacking and alternating the patterned papers.

Use foam squares only in the middle area to attach, as you will be trimming edges to create the Tree shape.

Mark the center at the top of the tree. Using the 12 inch trimmer. Create a cut from the top middle of tree and to the bottom of the tree, Do this on both sides.

Complete the layout with stickers and embellishments using more foam squares to create dimension.

Hope you enjoyed this idea

if you would like to get any project supplies to created this project go to https://www.creativememories.ca/user/kristafrench

Happy Scrappin'